Getting the carbon out of emissions

Getting the carbon out of emissions

June 26, 2013 — Proposed method could be more efficient than previous systems and easier to retrofit in existing power plants.

Many researchers around the world are seeking ways to "scrub" carbon dioxide (CO₂) from the emissions of fossil-fuel power plants as a way of curbing the gas that is considered most responsible for global climate change. But most such systems rely on complex plumbing to divert the steam used to drive the turbines that generate power in these plants, and such systems are not practical as retrofits to existing plants.

Now, researchers at MIT have come up with a scrubbing system that requires no steam connection, can operate at lower temperatures, and would essentially be a "plug-and-play" solution that could be added relatively easily to any existing power plant.

The new electrochemical system is described in a paper just published online in the journal Energy and Environmental Science, and written by doctoral student Michael Stern, chemical engineering professor T. Alan Hatton and two others.

The system is a variation on a well-studied technology that uses chemical compounds called amines, which bind with CO₂ in the plant's emission stream and can then release the gas when heated in a separate chamber. But the conventional process requires that almost half of the power plant's low-pressure steam be diverted to provide the heat needed to force the amines to release the gas. That massive diversion would require such extensive changes to existing power plants that it is not considered economically feasible as a retrofit.

In the new system, an electrochemical process replaces the steam-based separation of amines and CO₂. This system only requires electricity, so it can easily be added to an existing plant.

The system uses a solution of amines, injected at the top of an absorption column in which the effluent gases are rising from below. The amines bind with CO₂ in the emissions stream and are collected in liquid form at the bottom of the column. Then, they are processed electrochemically, using a metal electrode to force the release of the CO₂; the original amine molecules are then regenerated and reused.

As with the conventional thermal-amine scrubber systems, this technology should be capable of removing 90 percent of CO₂ from a plant's emissions, the researchers say. But while the conventional CO₂-capture process uses about 40 percent of a plant's power output, the new system would consume only about 25 percent of the power, making it more attractive.

In addition, while steam-based systems must operate continuously, the all-electric system can be dialed back during peak demand, providing greater operational flexibility, Stern says. "Our system is something you just plug in, so you can quickly turn it down when you have a high cost or high need for electricity," he says.

Another advantage is that this process produces CO₂ under pressure, which is required to inject the gas into underground reservoirs for long-term disposal. Other systems require a separate compressor to pressurize the gas, creating further complexity and inefficiency.

The chemicals themselves -- mostly small polyamines -- are widely used and easily available industrial materials, says Hatton, the Ralph Landau Professor of Chemical Engineering Practice. Further research will examine which of several such compounds works best in the proposed system.

So far, the research team, which also includes former MIT research scientist Fritz Simeon and Howard Herzog, a senior research engineer at the MIT Energy Initiative, has done mathematical modeling and a small-scale laboratory test of the system. Next, they hope to move on to larger-scale tests to prove the system's performance. They say it could take five to 10 years for the system to be developed to the point of widespread commercialization.

Because it does not rely on steam from a boiler, this system could also be used for other applications that do not involve steam -- such as cement factories, which are among the leading producers of CO₂ emissions, Stern says. It could also be used to curb emissions from steel or aluminum plants.

It could also be useful in other CO₂ removal, Hatton says, such as in submarines or spacecraft, where carbon dioxide can accumulate to levels that could endanger human health, and must be continually removed.

The work was supported by Siemens AG and by the U.S. Department of Energy through the Advanced Research Projects Agency for Energy.

Welcome to SUV System Ltd!

SUV System Ltd is ISO 90012008 Certified electronics distributor with 10 years of experiences.

We have built up long term business relationship with about many companies which are stockers and authorized agents. we have a steady and reliable supply to meet customer's demands to the greatest extent .Confidently, we are able to lower your cost and support your business with our years of professional service.

SUV System Ltd is Electronic Components Distributor Supplies,Find Quality Electronic Components Supplies Products IC(Integrated Circuits),Connectors,Capacitor,Resistors,Diodes,Transistors,LED at Suvsystem.com. Sourcing Other Energy, Environment, Excess Inventory Products from Manufacturers and Suppliers at Suvsystem.com

Electronic Components distributor:http://www.suvsystem.com

Connectors Distributor:http://www.suvsystem.com/l/Connectors-1.html

IC Distributor:http://www.suvsystem.com/l/IC(Integrated-Circuits)-1.html

LED Distributor:http://www.suvsystem.com/l/LED-1.html

Capacitor Distributor:http://www.suvsystem.com/l/Capacitor-1.html

Transistor Distributor:http://www.suvsystem.com/l/Transistors-1.html

Resistor Distributor:http://www.suvsystem.com/l/Resistors-1.html

Diode Distributor:http://www.suvsystem.com/l/Diodes-1.html

SUV System Ltd insists on the managing faith ofsincereness,speciality,foresight, win-win,so we build up stable-relationship customers located all over the world, including the States, Europe, Argentina, UAE, Malaysia, Australia,and India etc

we are focus on the following fields,and hope we can help you.

AT24C02N-SC18C AT24C02N-SC18 AT24C02NSC18 AT24C02N-SC-1.8 AT24C02N-SC1.8 AT24C03 AT24C02Y1-10YU-2.7 AT24C02Y1-10YU- AT24C02Y1-10YI-2.7 AT24C02Y1-10YI-1.8 SL383 AT24C02Y1-10YI-1.8 AT24C02-W6 AT24C02-W1.8-11SL788 AT24C02U3-10UI-2.7 AT24C02U 10SI 2.7 AT24C02TU-10TU-1.8 AT24C02TI18 AT24C02-TA AT24C02T1-10Y1-2.7 AT24C02-SU27 AT24C02-SU-2.7 AT24C02SU-1.8 AT24C02-SU-1.8 AT24C02-SI711 AT24C02SI-5V AT24C02-SI27 AT24C02SI27 AT24C02SI-2.7 AT24C02-SI2.7 AT24C02SI2.7 AT24C02-SI2.5 AT24C02-SI18 AT24C02SI-1.8 AT24C02-SI1.8 AT24C02SI1.8 AT24C02-SI AT24C02-SC-B AT24C02SC8 AT24C02-SC793 AT24C02SC5
http://www.suvsystem.com/a/3282.aspx